requires tow vehicle with aggregate supply

1. Air is used to feed and propel aggregate and emulsion to the nozzle at up to 135 lbs. per minute. No moving parts are involved in the spray injection process.

2. Aggregate feed system can pass up to 2-1/2 inch rock and is regulated by engine rpm providing infinite adjustment for job-site conditions.

3. Boom system is ergonomically designed for easy, natural movement without fatigue.

4. Self-cleaning Vent-Flo nozzle can patch close to traffic without overspray.

SPECIFICATIONS

Production
• 135 lbs./min, 1⁄4-1/2-inch wet or dry aggregate

Blower
• 450 cfm with 7 psi @ 1500 rpm
• Direct driven from engine flywheel
• 10 psi relief valve

Engine
• 74 HP Interim Tier 4 John Deere

Compressor
• 15 cfm direct driven
• Governed from 70-95 psi

Tanks
• Emulsion – 250 gallons, 200 psi working pressure R-15 insulation
- Two 1500 watt heat blankets with thermostats
• Clean-Out – 15 gallon, 200 psi working pressure
• Engine Fuel – 18 gallons

Swing Hose Carrier
• Tri-Fold No Fatigue Design

Operator Controls
• Emulsion and rock flow, engine rpm, horn

Frame
• 1⁄4-inch rectangular tube
• Dual axle, leaf spring (12,000 lb.)
• (4) 225/75R15 Load “D” tires
• Electric brakes
• Tail, brake, directional, strobe and arrowboard lights
• 96” wide x 194” long x 91” high
• Weight – 5,560 lbs dry

Color
• Safety orange