Aebi-Schmidt STRATOS Salt Spreaders

Municipality?

Aebi-Schmidt Spreaders are the preferred choice of many Ontario Municipalities for accurate, reliable, and low maintenance salt and sand spreaders for their winter control equipment as a means to satisfy their Salt Management plans and requirements.

Able to fully mix pre-wet materials, the STRATOS rear-discharge spreader allows for independant left and right spread control with leading-edge technology in an affordable, low maintenance unit.

Check out the Aebi-Schmidt STRATOS Web Page (opens in new window)

Municipal Contractor?

Many Ontario contractors already recognize and are using the superior spreading capabilites and reliability of the Aebi-Schmidt STRATOS spreader to perform their private or contractual winter control operations.

Optionally available as a roll-in roll-off unit (Ro-Ro), you are able to utilize your existing fleet of dump trucks for sanding operations during winter. The rear discharge, belt-only, design elimates the chain maintenance of conventional v-box spreaders, and greatly reduces annual rear axle brake maintenance and truck corrosion caused by spreading ahead of the drive wheels.

Able to fully mix pre-wet materials, the STRATOS rear-discharge spreader allows for independant left and right spread control which can enable full width road coverage in a SINGLE pass.

Check out the Aebi-Schmidt STRATOS Web Page (opens in new window)

AEBI-SCHMIDT STRATOS SPREADERS

The AEBI-SCHMIDT line of STRATOS and  STRATOS COMBI SOLIQ winter control spreaders allow for precise and accurate placement of fully mixed spread materials.

Available as permanent or demount units, our rear-discharge belt only delivery system provides exclusive operator control for varying, independenty, spread width to the left and right.  This feature, for instance, allows you to catch a turn lane to the right while still covering the entire main road surface.

Our AUTOLOGIC spread control further elevates automation with GPS controlled spreading of application rate and spread pattern according to truck location.

Ask us for more information and a demonstration!

Click the images below for a larger view.

Small Product Line

The small product line of STRATOS de-mountable spreaders
The modular construction system of the STRATOS de-mountable spreaders in the small product line allows a variety of configurations to fit in individually with the different deployment needs and carrier vehicles.

The specialist for small road surfaces
The small STRATOS construction series is intended for mounting onto transporters with a platform, pick-ups or narrow track vehicles. Their classical areas of operation are relatively small surfaces such as depots, car parks, cycle paths and footpaths as well as narrow lanes in old town centres and local roads.

Download an Info PDF (700kb)

Medium Product Line

The medium product line of STRATOS de-mountable spreaders

The modular construction system of the STRATOS de-mountable spreaders in the medium-sized product line allows a variety of configurations to fit in individually with the different deployment needs and carrier vehicles.

Designed to be multifunctional

The medium-sized STRATOS series is intended for mounting onto UNIMOG or other mediumsized carrier vehicles. The deployment possibilities are many, stretching from inner-city spreading to de-icing on “A” and “B” roads. The medium-sized STRATOS are available with hoppers ranging from a 1.7 m3 to a 3.0 m3 capacity, and is equipped with the reliable conveyor belt system.

Download an Info PDF (700kb)

Large Product Line

The large product line of STRATOS de-mountable spreaders
The modular construction system of the STRATOS de-mountable spreaders in the large product line allows a variety of configurations to fit in individually with the different user needs and carrier vehicles.

The specialist for large surface areas
The constractor series of large STRATOS machines is intended for mounting onto large carrier vehicles. With a controllable spreading width of between 3 to 12 metres, both sand and de-icing materials can be spread. The typical areas where these are sued are large surfaces and long stretches such as on major arterial roads and highways.  The STRATOS large product line is available with hopper sizes between 3.5 m³ and 9.0 m³, with the reliable conveyor belt system.

Working efficiently
A high degree of dispensing precision – putting exactly the right amount of salt in exactly the right places – contributes to the efficiency and thereby environmental friendliness of the large product line in the STRATOS construction series. Our  CL  controller allows an exact adaptation to the given situation and the fine-tuned technology makes the STRATOS de-mountable spreaders suitable for use on most types of road and road surface. The driver can control all the functions, such as the spreading density, pattern and lateral distribution, directly from his cab. He can thus react directly to any change in the conditions on the road surface. Depending on the model chosen, it is even possible to plan routes in advance, including individual spreading patterns or aligning with the data from a centralised spreading control centre.

Download an Info PDF (2mb) 

 

Towed STRATOS Spreaders

The towed STRATOS spreaders guarantee a maximum of spreading flexibility. The integrated power source means that the STRATOS-trailer only has to be attached to a towing vehicle and the spreading can begin immediately.

With the STRATOS A towed spreaders, the problem of de-icing on municipal roads and pathways is solved even more flexibly and cost effectively.

The specialist for all-round operations

The STRATOS A towed spreaders are available in sizes ranging from 0.8 m3 to 3.5 m3. Depending on the size of the spreader, they can be towed by various towing vehicles: from powerful four-wheel drive cars, to small utility vehicles, pickups, tractors and on to UNIMOGs or lorries. With the towed spreader it is  possible to effect de-icing operations on nearly all municipal roads and road surfaces.

Cost-effective performance

The STRATOS A series is, because of its flexibility, an ideal complement to the STRATOS de-mountable spreaders. Each in the series can be loaded with pre-wetted salt, a de-icing process which reduces the amount of damage to the environment and makes for excellent cost-effectiveness. The towed spreaders are easy to operate directly from wherever the driver is sitting via  the CL controller.

Inexpensive operations

The STRATOS A towed spreaders are powered independently from the towing vehicle. They obtain the necessary energy from the rotation of a cardan shaft on the axle alone. No expensive refitting of the towing vehicle is needed. If the towing vehicle is equipped with a hydraulic system, this can be used as the source of power.

Download an Info PDF (600kb)

Please, send me info.

Name: Email:

Or call us at (905) 670-3440