Spray Patchers & Tanks

T1 Spray Patchers & Tanks

The Cimline T1 emulsion transport trailer will improve your efficiency by having emulsion on site for your patching crew. When the T1 is paired with a spray injection patcher, your crew stays on the job site longer, saving time and money with fewer trips to the emulsion plant. The T1 further optimizes your operation with the ability to heat emulsion to your climate and application specifications easily and quickly with powerful electric heating blankets.

T-Stationary Spray Patchers & Tanks

Become self-sufficient in your patching and chip seal programs by installing a stationary emulsion storage tank. Convenient access to the properly heated emulsion is critical to streamlining the short patching and chip seal season. On-demand supply of emulsion keeps crews out working and not driving to the emulsion plant. Tanks are available in capacities from 3,000 to 10,000 gallons.

P1 Spray Patchers & Tanks

DuraPatcher Technology™ delivered at an attractive price point for smaller counties, townships and contractors looking to incorporate the four step spray injection patching process into their pavement maintenance protocol.

P2 Spray Patchers & Tanks

Patch in almost any weather conditions and eliminate labor-intensive, poor performing patches with the DuraPatcher 4 step process.

P3 Spray Patchers & Tanks

ll the same features as the trailer patcher but with truck-mounted convenience. Especially useful in low clearance residential streets or areas with tight turning radii. The 6 yd aggregate hopper keeps operators out working with fewer refills. The Universal design easily mounts to most truck chassis.

P4 Spray Patchers & Tanks

Utilize your existing Hook lifts and add the proven effectiveness of spray injection to permanently repair potholes and washouts. The self-contained Hook lift P4 can be loaded on the truck in minutes for two-person patching. In national tests, spray-injection patching has ranked highest for the lowest cost per patch and longest lasting versus all other methods.

P5 Spray Patchers & Tanks

The spray patcher removes the pothole in one quick and cost effective 4 step process. 1. Clean the area with compressed air. 2. Apply an emulsion tack coat. 3. Fill the hole with coated aggregate. 4. Cover the finished patch with dry aggregate so traffic can resume immediately